If your home is showing problems with water pressure it may be time to replace those old galvanized steel pipes or leaking copper pipes.

All You Need to Know About a Repipe in Orange County Is Your Water Bill Higher than Normal? If So, Your Pipes May Be Leaking and It’s Time for a Repipe.

If you have a residential property in Orange County and you are looking for a repipe, it is probably because you know that the smallest leaks can turn into the biggest problems. If a small leak is left untouched, you can notice mold and a larger leak. Not to mention, it could cause a lot of water damage. When you are repairing a leaking pipe it isn’t that bad. However, wherever there is one leaking pipe, there probably is another. This is especially true if you are living in an older home. When a pipe leaks, it is often going to cause higher water bills and eventually low water pressure for your home. If you believe that it is taking longer to shower and rinse out your conditioner, then it is likely that your pipes need some attention. When you are going to go through the process of repiping, you can count on Repipe1. They have been solving problems with plumbing for well over twenty-five years. 

The Best Pipe to Use for Repiping

Most houses that are worked on in the Orange County area use copper pipes. These are the most popular pipes that homeowners and plumbers utilized because they will last for many years. However, if the home was built before the year 1970, your home likely has galvanized steel pipes. These pipes are notorious for springing leaks. If the home has copper piping the leak can be repaired easily. If they are not that old, you may not even have to have them replaced either.

However, there have and always will be advancements in technology. With that being said there are newer materials available that you may want to take a peek at. PEX is now available. This is known as cross-linked polyethylene. These pipes are great for both cold and hot water situations. They are flexible pipes and are easier to install when space is tight compared to copper. Plus, they don’t utilize extra fittings. This makes them cheaper than copper. When you work with our Repipe1 specialist, they will go over your options and determine what is best for you and your home. 

Copper Pipes

Copper Versus PEX

There are a few things that you should take into consideration when you are choosing one pipe over the other. 

When copper pipes are not installed as they should be, they are prone to pinhole leaks. These small holes can be caused by minerals that can be found in the ground that is around them or even the minerals in the water flowing through the pipes. 

  • Pipes made of PEX are going to be more durable against chlorine and corrosion. 
  • When you use PEX pipes, they are flexible and can easily bend around corners. Copper pipes will need fittings to make them fit properly. 
  • Copper pipes can be quite loud. With PEX pipes, you will not hear the running water through your pipes. 
  • You can save money by attaching PEX to existing copper structures. If you cannot afford to replace everything at once, this is a great option. 
  • Shipping PEX is much cheaper because it is lighter and comes in larger spools. This makes installation cheaper as well. 
  • Manufacturers often offer a twenty-five-year warranty on PEX. 
  • PEX is better for the environment and helps you conserve energy. 
  • PEX doesn’t transfer heat like copper piping. 

Options are Good

Choosing what material you want to use is up to you. Repipe1 can’t determine this for you. They can recommend it, however, it is ultimately up to you. However, with that being said, duct tape is not the best fix to a leaking pipe. Plus, you also need to keep in mind that copper, PEX, and CPVC piping can be utilized better in certain areas. 

To help you make the best choice, call Repipe1. We have repaired many homes in the local area. Our priority is customer satisfaction. We also guarantee that all of our parts and work is great. If something ever happens and goes wrong, simply call us and we will come to take a look. We will fix the problem promptly. 

PEX vs. Copper Pipes: Which is The Better Choice for a Repipe?

Have you noticed that your older piping has been leaking? This probably means that you are faced with the question of Copper or PEX? Well, if you are like most people, you are unsure as to what option to choose. That is why we have put this guide together so that you can better understand the cons and pros of both options. Keep reading and learn all you need so that you can make your decision. By the time you have finished, you should know which one is best for your home. 

The Difference Between Copper and PEX Piping

For people who are not in the plumbing industry, both options are going to seem like great choices. Keep in mind that one option is not better than the other, however, both have different negatives and positives. Let’s take a look at some of the differences that they have. 

  • PEX is flexible and can bend easily. This makes installation in tricky areas much easier. These areas include corners and crawl spaces. Many plumbers will like to use PEX compared to copper because of this. PEX comes in many sizes starting at a quarter-inch to four inches. They are flexible because they are made of cross-linked polyethylene. 
  • Copper piping has been used for many years and has become the go-to option. It will last many years without maintenance and that is why so many people utilize it. However, copper pipes cannot be bent like PEX. This means that smaller spaces are going to consume more time and be more difficult. 

The main difference is how easy the installation is. 

Pros of PEX Compared to Copper

  • There are fewer joints which means that the price will be lower.
  • You can use it with both cold and hot water. 
  • PEX will not crack as easily as copper in cold temperatures. 
  • PEX weighs less than copper and shipping is much lower because of this. 
  • A shut-off valve is found on all supply lines. This means that repairs are easier. 
  • You do not need elbow fittings when using PEX. 
  • Torches are not needed when installing to connect the pipes. 
  • PEX efficiently maintains the heat inside the pipe better than copper. 

Many people will say that PEX pipes are the way to go. They do have many advantages, but that doesn’t mean copper doesn’t as well. 

Pros of Copper Compared to PEX

  • Copper can be purchased in rigid and soft forms. Plumbers have trusted copper for many years. 
  • You can use copper with HVAC and tap water systems. 
  • Soft copper is great for air conditioners and heat pumps. 
  • Rigid copper can be used for water lines because it stands heat better than soft copper. 
  • There is a fifty-year warranty on copper. 
  • You can recycle cooper which makes it eco-friendly. 
  • Copper is color-coded. Red is used for hot ad blue is used for cold. 
  • Fittings that copper uses are almost perfectly leak-proof. 
  • Copper doesn’t create toxic gasses should the home ever catch fire. 
  • Copper is great for pipes that run outside of the home because the ultraviolet or UV rays are not going to affect it. 

You have now seen the positive sides of both piping options, however, we want you to know the cons as well. You need to know both aspects before you make a decision about your home. 

Cons of PEX

  • PEX shouldn’t be used outside. 
  • You cannot recycle PEX pipes if they need to be replaced. 
  • Water damage can occur because the material in PEX isn’t impassable. 
PEX Pipes

Cons of Copper

  • Copper can corrode over time.
  • Extreme cold can cause the pipes to freeze and/or burst.
  • Copper is more expensive than PEX.

Now that you are educated and know all the positives and negatives, you can determine which type of piping that you want to use for your home. This is a decision that only you can make. If you are repiping the home on your own, PEX is going to be better. PEX is easier to handle if you are doing the job on your own. If you want to use copper, you should allow the professionals to get the job done.


Should I Repipe My House? The 3 Ways to Know for Sure!

If you are asking yourself Should I Repipe my house? You are not alone. There are three definitive ways to know if your home should be repiped as a whole or if a patch is enough. We are going to talk about the three issues that you may experience and this should be when you contact a specialist for your repiping needs. You will get a consultation at this time. During your consultation, they will evaluate your piping problems and needs and provide you with a rough estimate if your house needs to be repiped.

Repiping your house may be something that you fear, however, with the right people it is a quick and easy job. That is why you should always know the signs and when to repipe. If you are in need of a repipe, contact Repipe1 so they can help you determine what is best for you. Keep in mind that this process doesn’t have to give you stress. Simply contacting the right company can make the biggest difference for you and your home. We are going to talk about the three reasons that indicates you should repipe your home.


You Should Consider Repiping If  The Home is Over Fifty Years Old

Homes that were built before the ’60s are going to be great candidates for the entire home repiping project. This is because the piping is made of galvanized steel or even cast iron. Sometimes there may be both in older homes. Both the steel and iron are durable, however, they are prone to corrosion over time. If your home hasn’t had its pipes touched in fifty years, you can bet that they are decaying and should be replaced.

Older pipes should always be replaced because of the risk of corrosion, however, older popes are also at risk for freezing. They are not as updated and modern as copper or PEX piping options we have today. Older pipes can burst easier than newer pipes.


Your Water Pressure Has Dropped

If you are living in an older house, the water pressure may be low. Your showers and sinks do not work as they used to. You may notice that your hair takes longer to rinse than it once did. This is because you have lost water pressure. This could be an indicator that your pipes have clogged or corroded. This means that you will likely need a complete repipe of the home.

When the water pressure drops in a home it is likely that you have corroded or clogged pipes as stated, however, the problem could be much worse. You could have a leaking pipe that will only get worse over time. That is why it is always important to take note of the smaller things because they could lead to a bigger problem.


You Notice Leaking Water

If the home is having leaks, it is likely that the pipes will need replacing. The only time that patching may be used is if the pipes were installed recently. However, that is likely not the case. It is important that you notice and take care of leaking water as quickly as possible. Leaking pipes can cause mold and water damage. Plus, the damage of water could become worse as the leak becomes bigger over time. That is why you should never leave a leak untreated.

It doesn’t matter if your home is old, you have leaks, or you are experiencing issues with your water pressure, you should not be asking yourself “Should I Repipe the House?’ if you believe that your home is okay. If you are asking yourself that question you should get in touch with Repipe1 today. Repipe1 will specialize in PEX pipe and copper pipe. They will also let you know if you are in need of a new repipe for the entire house or just a portion. Whatever your home needs, the team of specialists at Repipe1 will be there the whole way. We will work to help you resolve any plumbing issue you may have. We will do it as quickly and inexpensively as possible so that your piping lasts for years. We are so positive that you will like our work that we guarantee it!


The 6 Steps Your Repiping Specialist Takes When Repiping a House

When you are thinking about repiping, just remember that there are many steps and it is a big project. We are going to talk about the normal process that a specialist will follow when he or she repipes a home.


An Initial Inspection

A specialist that has been qualified will come to the house and analyze the condition of your piping. If and when they are in need of a replacement, the plumbing specialist will let you know. He or she will also go over the options with you. The pipe that you choose can determine how long the project takes. Plus, they will look and determine where your access points are. Your access points can be in your wall, ceiling, or floor. Don’t worry, the holes will be patched at the end of the process.


A Schedule is Created

When your home is being repiped, it can be invasive for the family. Workers are going to be going in and out of the house and there will be materials as well. That is why a specialist will create a schedule that will give them time to work that won’t disrupt the process of your daily life more than needed. Once the schedule has been made, you should try to stick to it. This will help the job get done quicker and with fewer issues. If you are interrupting the workers, the job will not be done as quickly as it should because they cannot work with you in the area. This is dangerous and someone could get hurt.


A Safe Workplace is Created

There are preparations that are taken to make sure that the workplace is safe. This has to be done before anything is removed or put in. There will be holes made in ceilings, walls, and floors so that the company can access the piping. Before holes are drilled, the workers will lay down cloths and cover the flooring and any furniture in the area. They want to make sure that your belongings are not being destroyed. It is best to empty your cabinets and remove items that could get in the way before work starts. This saves you and them time.


New Pipe Installation

This will take different time depending on what type of piping you chose. PEX will be easier and quicker to install because it is both flexible and lightweight. PEX pipes do not require fittings or welding. However, any pipes that enter or exit your wall should be made of copper. Do not worry that your water will be shut off while this is happening. Your old piping system will be kept in place and running until the new one is up and running.


Switching From One to the Other

This is the step that will take the longest. It is at this point that the tie-ins that connect you to the city water will need to be removed from your old piping and put onto your new piping. You will need to check with the plumber to see if they can get certain areas done first. This could include the bathroom because you need to shower and use the bathroom. If you talk to your plumber, they will happily switch these areas over first so that you are not left without water.


Cleaning Up

Once your new system is installed and it is working as it should, the last step is to clean up the mess that was made. This would include repairing the holes that were made in your floor, ceiling, or walls. The company will not leave you with holes throughout your house. The drop cloths will all be removed as well. They should remove any debris that was leftover and make sure the space is clean. If you hire a reputable and reliable company, the home should be as clean as it was when they arrived.

If you are looking to schedule an inspection or if you have questions, you can call today. We have specialists ready to talk to you. Keep in mind that our specialists are involved and have helped over fifty-thousand people with their homes. They are ready to make your home another success story.


What is the Average Cost of Repiping a House in Orange County?

If you are in need of a repipe job in Orange County, you will often find yourself wondering how much this will cost you. You will not know for sure the price but an average would give you some peace of mind. You are likely wondering an estimate because you have an older home and are noticing that your water pressure has decreased. This could happen from corrosion or even clogging in the pipes. Plus, there may be water leaks that you don’t even know about. If this is the case for you, we are going to recommend that you are replacing your home’s pipes completely. The process for doing this is generally done as so.

  • The new pipes will be installed before anything else.
  • The next step means that the water supply will be transferred from your old system to the new one.
  • The old system will be taken out and disabled. This system will no longer be used and the items will be taken away. Older pipes and copper can be recycled.

Repipe1 is a company that specializes in repiping services in Orange County. They are going to offer inspections and estimates so that you know what to expect before the project starts.


Typical Cost of a Repipe

This may have you wondering what it costs on average to repipe a house. In general, if the home has three or fewer bathrooms it can be anywhere between two and fifteen thousand dollars. In some cases, it will be more expensive. There are several factors that are taken into consideration when a repipe is done.

  • The biggest thing to consider is how big the home is.
  • How many stories are there in the home?
  • The type of piping that you are using to install a new system. PEX or Copper?
  • How many facilities you have. This includes showers, sinks, tubs, and toilets. There are also several other items that count as facilities.

Other issues may also affect how pricing occurs. One is how easy the piping is to get to. Crawlspaces are hard and dirty. PEX piping will save you money and will be better used for many different reasons. When you replace any existing piping with PEX, it will be beneficial to you. Plus, it will be better for your wallet compared to other piping options.

Let’s talk about an example. You have a two-bedroom house that needs to be repiped. If they choose to use PEX it will cost around 3,500 dollars. However, if copper is what they choose, it will cost around five thousand.


What is All Involved in a Repipe?

Many people do not know the process that goes along with a repipe. The first step will be an estimate that will be followed by an inspection of your home. This inspection generally doesn’t take that long and workers will discuss the next step. The repiping process can take one day or even several days. During this time the water will be shut off when they are working. They will turn the water on when they are done working for the day. The homeowners can stay in their home during the process. To keep prices as low as possible, and to make sure that it is done as quickly as possible, PEX piping will only use three men and copper will use five.


What You Should Expect

With all that being said, you can expect the plumbing to average around 3,500 to 5,000 depending on what type of pipe you want. This is based on a two-bedroom home. During the process, you can use your home as you please. You do not have to leave. Just keep in mind that your water may be shut off during most of the day. Once the job is finished, your water will be restored and your new piping will be utilized. Yoru old system will simply be abandoned. These prices are those offered by our company, Repipe1. Our prices are considerably lower than many other specialists around. If you want a more accurate estimate or you are concerned about your home’s pipes, contact our company. We will be happy to assist you and help you determine what is best for your home.


Our professional repipe specialists are ready to help!


Repiping Blog